Good Sam RV Club Member
yes, there is a post from yesterday about the same thing. I cut the vent tubes out of the single 12v battery box that came with the 5er. I left a 1/4" lip surrounding the tubes. Then I cut a hole in the top and the bottom of the box I chose (Bonar) and epoxy'd the tubes in place. Cut a hole in the bottom of the front storage compartment for the battery box bottom tube, connected the top tube to the existing hose that is attached to the air intake vent and was done.
2011 Montana 3455, MorRyde pin box, TrailerSaver BD3 air hitch, G614 tires, 2x6volt batts, 2 x Honda 2000i, Rotochoks, 6 pnt Levelup, TST TPMS, Arvika bike rack, Voyager Semi Wireless Rear Cam, Flojet Mascerator, 2008 F350 Lariat 6.4L diesel 4x4 SB CC SRW