All, just came back from a drycamp trip..Filled up my fresh tank as usual and the water pump runs but nothing out of the faucets..Hooked up to city water everything is fine..hot water etc..put the winterizing hose in a bucket of water troubleshooting...
All, looking for the best place to order some LED's for the interior and exterior for my AF 811.. Wondering if anyone has bulb part numbers and I can maybe cross reference on Amazon and order them in bulk. Thx in advance all!Andy
All, noticed on our '13 AF 811 that the insert that goes into the bunk when folded down and in use tends to slide a little toward the window, allowing it to fall off of the lip on the bunk. The only thing different between my '09 811 is the slide win...
Anyone know where to get a Fox Landing for our new AF 811. Got rid of the Class C and bought a new 2013 AF 811. Delership wants an arm and a leg for the Fox Landing and I was wondering if anyone knows of a place to get one for a reasonable price........
Date Time Original 2013:08:17 08:48:52Exposure Time 1/884F Number f / 2.60Exposure Program Aperture priorityISO Speed Ratings 80Metering Mode CenterWeightedAverageFlash Flash did not fireFocal Length 3.70mmWhite Balance Auto white balanceMake SAMSUNG...
Grit dog wrote:Or heat 'em up CAREFULLY with a heat gun or propane torch. Use a hair dryer if you're uncertain as it wont get hot enough to burn the paint like a heat gun or torch.Then scrub the glue residue off with some lacquer thinner or acetone....
