We have a 3 year old Whirlpool 10 cu ft fridge that keeps having the tabs which are molded into the door to hold the door shelf fail as we drive down the road. The door is made with a SS outer metal skin and a 1/32 molded inner liner with the door s...
Wondering what I am missing? It seems like it would be pretty simple and inexpensive. We recently moved up from a 2003 Dolphin on a W22 chassis with 22K GVWR and 26K GCWR to a 2019 Newmar on a F53 chassis with a 24K GVWR and 30K GCWR. Problem is w...
After driving with our new gas class A in 20 degree weather have some minor leaks in the front firewall creating some minor comfort issues that just can't be resolved by the dash heater controls. I want to work on some of these infiltration leaks, b...
I too used the reversible hinge hole on the front of our fridge by using an eye-bolt. Quarter twist and it locks both the freezer and refrigerator door since it is located in the gap between the two doors.
OK - The first thing you need to do is quit thinking about Alaska being a destination and begin thinking about planning a voyage. Milepost is a must. Starting in Arizona, think about things to see and stops to make in the lower 48 as well. For ins...
Thank you for the tip on the JB Quick. Never used that product before. I am thinking about shaping a wooden peg to insert into the door insulation as well as inside the plastic tab as more substantial reinforcement. We will see how that works.
Grit Dog you are right if you look at it like that. But if you wanted a 4x4 pickup to tow and could get one that was a Swiss Army knife of electric toy possibilities away from the rig that 7KW power center looks mighty handy. It could silently run ...
