Hello, would you still have your 225 RBS Shadow Cruiser? If you do I have a friendly request. I had a blow out and the tire destroyed the wiring that goes to the slide, both 12v for light and 110v for receptacles. I have the slide end of the wiring u...
I did a nice job of fabricating reinforcement on my rear bumper, even adding 2 inch angle iron on the 7" I beam of my RBS225 Shawdow Cruiser. I bought an Harbor Freight aluminum carrier and surrounded it with a U shaped 2x2 inch tubing and used three...
I have done this project myself of putting a Champion 2800 inverter generator and two batteries on the ends of the bumper on the rear of a 26 foot travel trailer. A couple of concerns: 1. the 4" bumpers are designed to carry 4" sewer hoses, most of t...
Thank you for the phone number. They have never helped me before. I bought it brand new and the spare was dry rotted, of course who ever put the spare on the bumper promptly turned it around backwards so you could never see the splits in the rubber u...
Hello, would you still have your 225 RBS Shadow Cruiser? If you do I have a friendly request. I had a blow out and the tire destroyed the wiring that goes to the slide, both 12v for light and 110v for receptacles. I have the slide end of the wiring u...
Here's a short one, Cummings diesels on Holiday Ramblers have sensor problems. It did happen in South Georgia in a terrible rain and wind storm and it might be contributed to that. We fueled up at Flying J in Valdosta. Thirty miles latter the warn...
