My 2006 era Manchester side mounted tank (86157) is at end of life. It won’t pass a recertification. Just wondering what my options are for replacement. Similar sized tanks on the interweb aren’t cheap and the mounting attachments look different a...
The generator will start but then fart and sputter for a couple of minutes then die. Then won’t start. Leave it for a few hours and it might or might not be ok. Seems more failure prone in the mornings but still in the 70’s early morning and toda...
Hi, How much power should a brake buddy classic draw during the compressor cycle? With the engine running on the toad and the alternator putting out 14.1v the compressor cycle drops it down to 11v. Without the engine running the compressor takes i...
Any way to increase the threshold of what Garmin considers “sharp”? The gentlest bend generates a warning so as a true hazard alert it’s useless.Also I’ve disabled it in the driver alerts settings but it’s still displayed. Unit has the latest sof...
Grit dog wrote:I’d run er til she pukes. You don’t appear to know definitively if it’s rusted enough to be compromised soon. That’s step 1. If it’s not like half rusted through, give it a Rustoleum rebuild and find a place that isn’t so nosy to get i...
Gary45 wrote:mcewena wrote:dougrainer wrote:USA ASME tanks are not required for certification. Are you POSITIVE, that Canada requires ASME certification and not just DOT portable tanks which DO require recertification? DougI’m positive that some fil...
Ava wrote:My 94 DP Bounder still has the original tank. I have never had any problem filling it here in Canada or the USThat’s great, and if I weren’t having problems I wouldn’t be concerned either. I'm assuming it’s condition not age that’s the di...
Dutch_12078 wrote:A rack fabricated to hold two or three 20 lb BBQ cylinders upright could work using an automatic switchover regulator setup.Can they be used/stored/transported on their side or 45 degrees?
dougrainer wrote:USA ASME tanks are not required for certification. Are you POSITIVE, that Canada requires ASME certification and not just DOT portable tanks which DO require recertification? DougI’m positive that some fill stations won’t fill my ta...
