A few years back I installed a regulator in the city water system intake to control water pressure. I also installed a pressure gauge to set the regulator and to keep an eye on the pressure to see if the regulator was holding. I set the pressure to...
I've read how to transfer programs from my Dish Hopper to an external hard drive to then watch on the Wally in my RV. The external hard drive being used on my Wally has already been formatted for DISH use so I was surprised to see when I plugged it ...
I've been thinking about adding a DC-DC charger now that I've added 400 amp hours of AGM batteries. There are lots of useful posts but I haven't run into a couple of things I'm curious about.One of the reasons for a dc-dc charger is to avoid burning...
Sorry to not get back sooner. Sometimes taking some fine sandpaper to the tip of the ignitor rod to clean off any rust can help make a better connection. Also, clean off the area where the spark jumps across to the base.
When you first start it on propane does it ignite with the electronic ignition? If no, and you're having to use a flame to start it, it sounds like it runs until it gets to the proper cool temperature and then shuts off. Then when it's time to star...
Interesting, thanks for the response. I wonder why my water heater will come on and run for about 10 minutes even after driving all day?Still a little puzzling!Bill
Doug if you happen to come back to this thread I have one more question. If it was the expansion of the water from the motoraid that is causing the problem, why do you think the pressure gauge doesn't rise when the water heater is used when we're at...
