Looking for flooring installers in the St Louis area that have experience with slide outs and gas engine dog house covers. Want to replace old vinyl and carpet floors with mostly vinyl and a little carpet in bed room.
Planning in replacing the Magnadyne 9900 radio in my MH. Problem is the current unit is a 1.5 DIN and wanting a 2 DIN unit. Looking for recommendations from someone that has done it, specifically on where new brackets/sleeve were obtained.
What's the fix for a KWIKI jack that leaks only when temps go from 20 and below to 50 and above? Think it has to do with the contraction and expansion rates of the different metals of the sleeve and the tube.
Not familiar with your model but in my experience when the flame has trouble lighting or staying lit it's usually an issue with the flame orifice tube. It could have debris that can be blown off or the tube can be corroded and needs replacing.
I have a dumb question. Where is the temp sensor for the rear or what triggers the rear ac/heat pump or furnace to turn on? Maybe the answer points to the solution. Both my last MH and my current MH have thermostats in the front and rear.