I have a 2007 Itasca SunCruiser 35l. The front living room/dining room slide has a slide lock at the top that is electrically operated. This last time out, it stuck in the unlocked position (could still use slide out). I am trying to figure out exac...
I have an approx. 40 year old 12/6 volt automotive battery charger. When set for 12 volts and not connected to a battery, it reads 12.81 volts. Set to 6 volts and not connected to a battery, it reads 8.1 volts. When I connect to a 12 volt battery, an...
I would like to get a LP hose that has a male disposeable canister fitting on one end (center prong with internal threaded nut) and either the internal left-hand thread or large external nut fitting that will screw onto 20 lb bottle and is 5' or 6' l...
dougrainer wrote:The 625 system has nothing to do with your type of HWH slide lock system. 625 is the Jack control system. But, I have never had to work on a Winne slide lock. The only system have worked on with HWH slide locks was the mid 2000 model...
Ed C wrote:We had a '11 Journey with slide locks. They broke a couple of times. There is a tiny "micro switch" in side that is very fragile. I took them out and never used the locks in 75,000 miles of traveling without a problem.Thanks for your re...
dougrainer wrote:http://server51.hwhcorp.com/?page_id=61777Is this the HWH lock system you have? DougOr this one?http://server51.hwhcorp.com/wp-content/uploads/ml41035.pdfOr this one?http://server51.hwhcorp.com/wp-content/uploads/ml39511.pdfThank you...
I have the same issue at times. I will bet you have balancing beads in your tires and dust from them gets into the valve cores and holds them open. You need to give them a shot of new air before trying to check pressure to clear out the debris and le...
We tow a 2020 Jeep Cherokee Trailhawk with no issues. Granted, Jeep has resolved this issue at the factory and needs no wiring harness.My suggestions are like others have said.o Check front end alignment with caster set to upper limit of recommended ...
