When hooking up batteries together (lithium) to make a bank of 2 - 12v and in a year 2 more with the goal of 20 in 2 yearsWhat size welding wire would one use to reduce loss. Keeping in mind all same length
I want to detach the chassis alternator from charging the house batteries. WHY? Because I do not wanting lithium batteries drawing all the alternator can provide and causing the alternator to overheat ( especially at low rpms) I think that removing t...
So if I want to only charge the house I can seperate the chassis cable from the Bim225 and insert the positive to the chassis cable and pick up a ground from the house battery shunt?Would it be possible to then hook an on off switch between bim chass...
Weigh coach 4 corners to get proper tire pressure add saf-T-pluss next then if needed add rear trac bar.We did not need Trac bar drives like a town car. One handed.
Be SURE to follow the instructions for EternaBond,,,, Clean well, prime if required and DO NOT Strech the tape. Use a roller to assure proper contact. I have had a 96 HR Endeavor which had First Owner applied Eternabond which was still good a year ag...
