It looks like we have a small leak on our 2021 Retro, it has created some soft spots on the osb flooring. Has anyone used pourable epoxy to strengthen the flooring in a these units? There are only a few spots near the door.
Looking for a Short Queen. See offerings from Linenspa and Zinus on Amazon - anyone have experiences with either? Currently have the factory 6" foam unit in our trailer and its woefully inadequate. Don't want to break the bank - but need something be...
We need to upgrade the short queen mattress in our trailer. The factory one is corner cut, but it really doesn't look like it saves all that much room. Am I missing something in having to have a corner cut mattress?
We have a two month old Riverside Retro that has maybe 2000 miles on it. I am starting to get an overload message on my Tekonsha P2 controller. I hooked up another truck with a factory controller and it gave me a "short" message. There is definitely ...
Here is the sitcky point. The awning mount points are not accessible without removing interior panels. There is no way to inspect or maintain them. If they leak the only way you know is that the floor gets soft.I have reached out to the dealer and to...
Even though the unit is a 2021, it was purchased in 2020 and is out of warranty. I have contacted the manufactured several times and they are not getting back to me.The soft spots are not numerous - and I know the proper repair is to cut out the osb ...
I started by cutting the power wire to the passenger side front axle, no change. Then cut the drivers side - an no more short. I reconnected the passenger side and have three drums running without issue. I can only assume at this point that the magne...
The trailer has two 3500lb axles with 10" drum brakes on each wheel. Yes the wires run through the axle tubes. Here is what I have done as far as diagnosis so far.1. Had son max out the controller manually to 11 on the meter. I shook, moved touched a...