Good Sam Club Open Roads Forum: Search
Open Roads Forum Already a member? Login here.   If not, Register Today!  |  Help

Newest  |  Active  |  Popular  |  RVing FAQ Forum Rules  |  Forum Posting Help and Support  |  Contact  



Open Roads Forum  >  Search the Forums

 > Your search for posts made by 'HouseApe' found 10 matches.

Sort by:    Search within results:
  Subject Author Date Posted Forum
RE: Reese Dual Cam HP frame brackets

To close this story off. I got the new brackets and installed them today. The new brackets where definitely at 90. The photos kind of show how the old ones where well over 90. https://i.ibb.co/1qTrGhm/BECBE075-1-EA1-4721-9-FC7-D7-E4-D4-BB7-F02.jpg https://i.ibb.co/kG87xfn/79-A7-F36-A-2778-40-E7-A266-9-BB0-DE74-D7-F3.jpg https://i.ibb.co/RjQJF4Z/5442-D8-A0-33-BA-4431-959-F-7-A51-ACB90269.jpg
HouseApe 10/15/19 08:36pm Towing
RE: Reese Dual Cam HP frame brackets

Yes I did not get why they said that either. Anyway this is actually my second dual cam setup. My first one was a round bar and now have the titan 17K. Hopefully the new cam kit will square. https://i.ibb.co/xX8Xv54/204474-EE-8725-4976-A872-E8-AFBAA558-C2.jpg https://i.ibb.co/hHgtJdX/3-CE1-B231-5986-4-AFA-B2-D4-59-B6-A0125144.jpg
HouseApe 09/16/19 11:30pm Towing
RE: Reese Dual Cam HP frame brackets

Reese is now sending me a new dual cam kit. Was not easy. Had to send proof of purchase and photos of the issue first. And they believe it would not case any issues they way it currently is!
HouseApe 09/16/19 02:49pm Towing
RE: Reese Dual Cam HP frame brackets

Thanks for all your feedback. I’ll call Reese today. The brackets are the issue. Finally took some photos. Since the cam arms are at different angles I think they are loading one bar more than the other. And yes I have the bars marked L and R! https://i.ibb.co/SQrVDtW/C7807-F07-80-D4-4311-BCB7-631-FD351-FF17.jpg https://i.ibb.co/b2KmsMm/AB10-B019-C6-B5-4062-AD83-ABF67-B9-D3748.jpg https://i.ibb.co/g3ZQWxB/AAEF4-B8-C-B6-DC-4-C96-8-F1-B-A0929669-AE2-A.jpg https://i.ibb.co/kqtCBV5/B0-FA91-B4-4696-4-F1-C-B1-B5-19-A183-D45-A21.jpg
HouseApe 09/13/19 07:54am Towing
RE: Reese Dual Cam HP frame brackets

Yes I’ll call then again. I do have the same one as yours on the right hand side with the welded inside 90. The outside bend is the issue it’s not at 90. The radius is good and is not interfering with the corner of the frame. I also have the nutcerts holding the cam brackets on. My measured tongue weight is1,680 lbs and I have the 1,700 lbs bars.
HouseApe 08/22/19 10:47am Towing
RE: Reese Dual Cam HP frame brackets

Get some sheet metal approx the thickness of the rivet heads, make a couple of shims that fit around rivets, and bolt up!! Been using method on 2 different trailers for the past 9 yrs. No problems, PERIOD!!!!! That’s not the issue. The issue is the cam frame bracket is not at 90 and is not sitting flat on the bottom of the frame causing the cam arm to be at an upward angle. I would have to make a tapered shim to correct this.
HouseApe 08/22/19 09:41am Towing
RE: Reese Dual Cam HP frame brackets

This thread shows the issue I have straight out the box!
HouseApe 08/21/19 11:06am Towing
RE: Reese Dual Cam HP frame brackets

Well to update this I’m having an issue with my cam arms. They are not square to the frame and only have a ware pattern on the inside edge of the cam and the spring bar. After about 2000 miles the spring bar still has paint on the outside 1/2 edge of the V. So it appears my initial concern was valid. I forgot to get some pictures. This the 17K Reese Titan straight line and my actual tongue tongue weight is1680 lbs.
HouseApe 08/21/19 10:38am Towing
RE: Yamaha EF3000iSE neutral bonding issue - Solved

Its fixed! Turns out that my bonding plug sold copper wire had skinned over and was not passing the voltage as it should. I simply cleaned the wire and got a good torque on the screws inside the plug. Crazy thing is it did pass a continuity test with my meter before I took it apart and the only reason i took it apart was to use it in the socket to measure voltage and polarity when the generator was running.
HouseApe 04/25/19 01:19pm Tech Issues
RE: Battery Box for two 6v GC2's?

Camco has a new dual battery (end to end) box out. It’s part number 55374. I got one from my dealer for $23. It’s now on Amazon for $17. Camco Heavy Duty Double Battery Box with Straps and Hardware - Group GC2 | Safely Stores RV, Automotive, and Marine Batteries |Durable Anti-Corrosion Material | Measures 21.5" x 7.4" x 11.2" - (55374)
HouseApe 04/10/19 10:39pm Do It Yourself Modifications and Upgrades (DIY)
Sort by:    Search within results:


New posts No new posts
Closed, new posts Closed, no new posts
Moved, new posts Moved, no new posts

Adjust text size:




© 2020 CWI, Inc. © 2020 Good Sam Enterprises, LLC. All Rights Reserved.