Good Sam Club Open Roads Forum: Search
Open Roads Forum Already a member? Login here.   If not, Register Today!  |  Help

Newest  |  Active  |  Popular  |  RVing FAQ Forum Rules  |  Forum Posting Help and Support  |  Contact  

Open Roads Forum  >  Search the Forums

 > Your search for posts made by 'Kpackpackkelley' found 12 matches.

Sort by:    Search within results:
  Subject Author Date Posted Forum
RE: onan marquis 7000 generator /no start

15 - 40 any brand Good info.
Kpackpackkelley 05/10/22 06:52am Tech Issues
RE: Onan Microlite 4000 shaft locks up on occasion

When Onan went to the aluminum block on the Nhm’s and Bge’s they weighed around 270, the Cck weighed over 300 with the cast iron block and they had 3.5 quarts of oil and oil filters and ran at 1800 rpm’s. The 4000 microlite weighs around 170, 1.6 quarts of oil no oil filter and runs at 3600 rpm. I can’t help that they had to stay competitive. I have a 4000 microlite and I’ve worked on few of each one of the generators.
Kpackpackkelley 04/28/22 06:41am Tech Issues
RE: Onan Microlite 4000 shaft locks up on occasion

I’m not arguing with anybody. Onan had to move to 3600 rpm from 1800 rpm to stay competitive in the market for generators that’s the name of the game. They are not made like the Ws3 or the Cck that were made to last forever. I’ve seen a spec K microlite piston rings stuck on the ridge, if the Op can’t find any reason it’s getting stuck he needs to pull the head and look at the piston. As is posted here It could be anything.
Kpackpackkelley 04/28/22 05:46am Tech Issues
RE: Onan Microlite 4000 shaft locks up on occasion

In the service manual page 10-9 shows how to ream the ridge That may not be the problem but I’ve seen it happen.
Kpackpackkelley 04/27/22 04:23pm Tech Issues
RE: Onan Microlite 4000 shaft locks up on occasion

Yes sir that’s a iron engine, the Onan microlite is aluminum and not made to last like that engine.
Kpackpackkelley 04/27/22 01:41pm Tech Issues
RE: Onan Microlite 4000 shaft locks up on occasion

All I know is a guy brought to me a stuck 4000 microlite and I pulled the head and had to hit it with a 2x4 to get it off the ridge. Granted he didn’t take care of it as it had 1800 hrs on it. The only way to know is pull the head when it is stuck. When you can’t find anything all you can do is pull the head. I don’t answer unless I’ve seen it.
Kpackpackkelley 04/27/22 11:55am Tech Issues
RE: Onan Microlite 4000 shaft locks up on occasion

If it has a ridge at the top you’ll have to get it reamed if it still runs good and makes electricity. You can look on YouTube and see ridge on cylinder wall and how they ream them and it may be in your service manual.
Kpackpackkelley 04/27/22 05:21am Tech Issues
RE: Onan Microlite 4000 shaft locks up on occasion

How many hours on the generator? They get a ridge at the top of the cylinder and get stuck on it.
Kpackpackkelley 04/26/22 03:37pm Tech Issues
RE: Stanley battery charger BC50BS

Batteries were up this morning after surface charge went off to 12.7 volts. I’m going to talk to the guys that sell batteries at interstate about this type of charger they recharge a lot of batteries and resell them, I’ve bought some that lasted a long time. Thanks for the post.
Kpackpackkelley 01/29/22 07:17am Tech Issues
RE: Stanley battery charger BC50BS

I have the lawnmower battery charged all the way with the charger, it’s surface charge is sitting at 13.19 by my meter, I’ll let it set tonight and get the surface charge of of it and check it in the morning. New batteries on my diesel truck, they check good by my meter. I know this auto charger doesn’t heat up batteries like the old 2 amp manual charger’s. If I find a used one, would it hurt a sealed battery? I wish I had a PD with charge wizard in the barn, they’re so nice.
Kpackpackkelley 01/28/22 05:30pm Tech Issues
RE: Stanley battery charger BC50BS

That’s the way my PD with a charge wizard works in my trailer, I understand it. I’m asking about sealed batteries on a tractor, 4 wheeler, lawn mower, and truck. This is a regular automatic charger. I’m going to put new batteries in my meter and check that. Like I say I used to use a manual charger but they’re all gone and you can’t find the small ones anymore just tall ones like a mechanic shop uses. My meter could be bad. Thanks
Kpackpackkelley 01/28/22 05:08pm Tech Issues
Stanley battery charger BC50BS

Hello, Stanley battery charger BC50BS It’s been awhile since I’ve posted. I’m having trouble with regular battery charger’s, the one I have is a automatic Stanley BC50BS. My question is will it ever bring a battery to 100%? When it says full charge and goes into float it’s only around 12.45 volts. If I leave it hooked up in float will it finally get a full charge? I used to use a 2 amp manual charger and after 6 or 8 hours it would be 100%.
Kpackpackkelley 01/28/22 02:57pm Tech Issues
Sort by:    Search within results:

New posts No new posts
Closed, new posts Closed, no new posts
Moved, new posts Moved, no new posts

Adjust text size:

© 2022 CWI, Inc. © 2022 Good Sam Enterprises, LLC. All Rights Reserved.