| |
Subject |
Author |
Date Posted |
Forum
|
 |
RE: Lippert Slideout Gear Pack Wheels
I put a 2x2 about 2 feet long on top of a bottle jack and under the rack of the gearpack you are removing. It doesn't take much, just get the weight off the attaching bolts to pop it out, or in.
|
byronlj
|
07/20/20 11:19pm |
Tech Issues
|
|
RE: Lippert Slideout Gear Pack Wheels
I replaced mine with steel rollers, they called the gear pack a heavy duty gear pack. I have a very large slide and my rubber wheels had collapsed.
|
byronlj
|
07/19/20 11:10pm |
Tech Issues
|
|
RE: DPF message
Call the dealer. Need to reset computer and possibly clean the def system.
|
byronlj
|
07/19/20 11:06pm |
Tow Vehicles
|
|
RE: First tow with new 2019 Ram 3500 and ...disappointed.
Wait until you get it loaded and some weight on the pin. Then, go from there.
|
byronlj
|
06/26/20 10:28pm |
Towing
|
|
RE: ongoing generator issue
The 30amp breaker on the generator could be weak causing it to trip before the compressor winds up. Try the 2 1500w heaters as stated and turn them on simultaneously with a switch, like a good power strip. See if that breaker pops on the generator.
|
byronlj
|
06/22/20 10:54pm |
Tech Issues
|
|
RE: ongoing generator issue
I have the same generator and it will run both of my ac's. In fact, I can run my 230v mig welder with it. I think your problem is ac related. How are you connected, and how are you running the rpms up manually?
|
byronlj
|
06/21/20 10:19pm |
Tech Issues
|
|
RE: crimping battery lug
I have been building battery cables for decades using solder. You only need a handheld propane torch to accomplish the task. Auto parts stores even sell lugs that contain the solder or have a solder puck. Lots of videos on this.
|
byronlj
|
06/09/20 10:38pm |
General RVing Issues
|
|
RE: crimping battery lug
Take the lug off, clean it, and solder it back on using flux.
|
byronlj
|
06/09/20 11:07am |
General RVing Issues
|
|
RE: Tucson to Show Low
Winding road with steep climbs but the scenery is beautiful. Your rig will handle it alright.
|
byronlj
|
06/06/20 11:33pm |
Roads and Routes
|
|
RE: brakes on a double tow
Boat=water=surge brakes.
|
byronlj
|
05/31/20 10:58pm |
Fifth-Wheels
|
|
RE: Arizona RV licensing
When I bought mine I was upset. Has anyone ever paid MSRP for an RV?
|
byronlj
|
04/17/20 10:54pm |
General RVing Issues
|
|
RE: Lazy man wants inverter disconnect switch INSIDE trailer
I bought an inverter with a remote off switch. Only had to run a phone line in basement.
|
byronlj
|
04/17/20 10:44pm |
Do It Yourself Modifications and Upgrades (DIY)
|
|
RE: gutter spout upgrade
A clothes pin will do the same.
|
byronlj
|
03/12/20 10:26pm |
Do It Yourself Modifications and Upgrades (DIY)
|
|
RE: Welding outlet with 50 amp rv outlet
x3 on BB-TX. I do that at my well site.
|
byronlj
|
02/18/20 08:35pm |
Toy Haulers
|
|
RE: Hydraulic code
I think there is a reset on your control panel. I would try that after you get allyour jacks all the way up. Also, I would get that atf out and add motorcycle fork oil instead. Do google search for creaking jacks.
|
byronlj
|
11/19/19 09:47pm |
Tech Issues
|
|
RE: Genesis Supreme RV Overnighter
I would be putting a jeep cj7 on the back. Seems like a lot of weight behind the axles.
|
byronlj
|
11/03/19 08:02pm |
Toy Haulers
|
|
RE: Slide out roof question
Peel it off, CLEAN it, and put a strip of eterna bond back down.
|
byronlj
|
10/20/19 09:46pm |
Travel Trailers
|
