| |
Subject |
Author |
Date Posted |
Forum
|
 |
Alladin Junior
On my 06 Holiday Rambler Ambassador the Alladin Junior system will not turn using the toggle switch. The "power on led" does not illuminate. I have looked for a fuse and have not been to locate one. Does anybody know were it is located and where does the power come from. And does anybody where I can get a wiring schematic?
Thanks in advance; Keith
|
kdk
|
04/07/20 07:56pm |
Class A Motorhomes
|
|
RE: Odometer error
When I changed tire size my Cummins dealer plugged in his computer and re-calibrated the transmission compyter to read correctly. Now comparred to the GPS its off less than 1/2 mph.
|
kdk
|
03/06/20 09:05am |
Class A Motorhomes
|
|
RE: Generator
Had same issue on my 06 Ambassador. When trouble shooting I found out the switches provide a ground for the start relay on the generator. Problem turned out to be a corrode pin (actually where the wire was soldered to the pin) on the cable connector from the generator to the motor home right above the front axle. I cut and spliced around it. If I ever have to remove the gen I'll just cut the splice.
Hope this helps; Blessings Keith
|
kdk
|
02/05/20 03:36pm |
Class A Motorhomes
|
|
RE: Generator
Had same issue on my 06 Ambassador. When trouble shooting I found out the switches provide a ground for the start relay on the generator. Problem turned out to be a corrode pin (actually where the wire was soldered to the pin) on the cable connector from the generator to the motor home right above the front axle. I cut and spliced around it. If I ever have to remove the gen I'll just cut the splice.
Hope this helps; Blessings Keith
|
kdk
|
02/05/20 03:35pm |
Class A Motorhomes
|
|
RE: Anyone interested in 83 Pace Arrow Tear down and Rebuild?
I have been following your post for a while and have been wondering about how you plan on doing the wiring which would normally be installed behind the wall paneling,
|
kdk
|
01/30/20 07:58am |
Class A Motorhomes
|
|
RE: Class A Fulltimer freeze concerns
If really want to be safe, go to tractor supply and buy a freeze cube. They plug in a electrical socket and at 35 degrees they will turn on a heater and off at and 45 degrees. Used for animal water tanks. Go to walmart and purchase a 400 watt personal heater. Put this in your wet bay and worries are over.
|
kdk
|
11/12/19 12:09pm |
Class A Motorhomes
|
|
RE: windshield wiper failure
Try using rain-x latitude blades, because they have less wind resistance
they don't put as much strain on the motor
|
kdk
|
09/28/19 09:21pm |
Class A Motorhomes
|
|
RE: Where is everyone getting their wiper blades?
Paid that big price once, mine had the big J hook. Cut last 2 inches off, went to junk yard and got 2 arms off ford pickup for $5.00, cut 3 in. off that arm, overlapped new smaller J hook on old arm and welded. Now buy new 28 in. rainex latitude blades for $8.oo. Just an idea
|
kdk
|
09/28/19 09:16pm |
Class A Motorhomes
|
|
RE: 6" valve stems
If you install these from experience also install rubber wheel inserts to support them
|
kdk
|
09/27/19 12:07pm |
Class A Motorhomes
|
|
RE: Battery Hold downs
When mine corroded beyond use I threw them away. I figure if the batteries bounce out of the tray in a 40 foot motor home, I've got more serious problems than batteries. (jmho)
|
kdk
|
09/27/19 11:28am |
Class A Motorhomes
|
|
RE: CUMMINS AC TENSIONER
Not 100% positive but that looks like a threaded rod screwed into the eyelet. Try turning it out. If it comes out go to a industrial supply store and purchase a threaded rod grade 5 or grade 8. Cut to length use
"lock-Tight" when installing the threaded rod into the eyelet. You now have manufactured your own tensioner. Hope this helps
|
kdk
|
09/03/19 03:07pm |
Class A Motorhomes
|
|
RE: RV Tank Maintenance
Google " GEO " method, Dawn dish soap and Calgon water softener. Been using this for years with good success. Lasts about 6 months then do it again. I do this every time I move.
|
kdk
|
07/15/19 08:30pm |
Class A Motorhomes
|
