Good Sam Club Open Roads Forum: Search
Open Roads Forum Already a member? Login here.   If not, Register Today!  |  Help

Newest  |  Active  |  Popular  |  RVing FAQ Forum Rules  |  Forum Posting Help and Support  |  Contact  



Open Roads Forum  >  Search the Forums

 > Your search for posts made by 'thealexdexter' found 6 matches.

Sort by:    Search within results:
  Subject Author Date Posted Forum
RE: New sink in 2016 AF811SB

Thanks all. Looking forward to using more if these fires would stop burning down my favorite places.
thealexdexter 08/21/21 09:13am Truck Campers
RE: New sink in 2016 AF811SB

Thanks Bedlam, post edited with links now.
thealexdexter 08/19/21 09:36am Truck Campers
RE: agm charging capability in 2016 Af 811SB?

Thank you all. I’m not near shore power and do not have access to jump from truck. It’s in storage. Sounds like I’ll be fine so I’ll buy the batteries and replace. Thanks.
thealexdexter 08/19/21 09:07am Truck Campers
New sink in 2016 AF811SB

Thought I'd share a sink upgrade for this model in case you have one and cannot stand the terrible dual bowl plastic sink. Pretty straight forward job as the sink I found exactly and very tightly fits the existing cutout. It is a very nice upgrade. Its deep enough to have dishes in it and put a cutting board or drying rack across it at the same time. Impossible in the old sink. Without the mega oversized plastic walls it has much more usable volume. It is also flush with countertop vs the plastic which stick up and gets in the way. SINK Notes: 1. You have to grind off the upper right corner of sink around an inch so it clears the wall. 2. To drill the new faucet hole the countertop you lose a bit of structure as you drill through the brace. I reinforced with 1x2 being the original then made a small strap across the hole screwed into he new brace. Then drilled faucet hole. 3. Upper drawer to right of range hits sink. Very easy to reduce drawer box height an inch or so to clear and doesn't affect functionality or looks at all. 4. Existing plumbing left in place, but removed and replaced from p trap to sink and replaced with a smooth interior walled flexible one from Home Depot. That was a tight fit but it goes. You can see it in the photo. 5. Check the mounting points of your jack controller. I happened to be replacing mine at the same time, so I made sure it was mounted an inch lower so I could access the screws with the sink in. Easily moved with four screws in seconds. 6. OEM faucet fits, but its hard getting your hands up there to tighten. https://i.imgur.com/dS0o9Hzl.png "border=0" https://i.imgur.com/m3zZPvb.pngClick For Full-Size Image. https://i.imgur.com/1geRBUHl.jpg "border=0" https://i.imgur.com/m3zZPvb.pngClick For Full-Size Image. https://i.imgur.com/1bwmZvjl.jpg "border=0" https://i.imgur.com/m3zZPvb.pngClick For Full-Size Image.
thealexdexter 08/18/21 03:37pm Truck Campers
agm charging capability in 2016 Af 811SB?

My batteries are dead and I cant move the slide to check what charging system I have. I want to replace the lead acid with AGM but need to be sure I can charge them before buying. I almost positive this year/model uses a progressive dynamics PD9200 which can do AGM. Can anyone confirm if this is the right charger in the 2016 AF 811SB and if that year also had the AGM charging capability? https://www.progressivedyn.com/pd9200-converter/ THANKS!
thealexdexter 08/18/21 03:09pm Truck Campers
RE: One jack not functioning AF811

Finally resolved this. Sent controller back to Reico which was determined defective. $500 later it’s back working. Sure it’s 5 years old not basically it used. Should have lasted longer in my opinion. Thank you to all for your suggestions on troubleshooting.
thealexdexter 08/05/21 01:53pm Truck Campers
Sort by:    Search within results:


New posts No new posts
Closed, new posts Closed, no new posts
Moved, new posts Moved, no new posts

Adjust text size:




© 2022 CWI, Inc. © 2022 Good Sam Enterprises, LLC. All Rights Reserved.