โSep-14-2017 09:09 AM
โSep-19-2017 05:51 AM
โSep-18-2017 06:45 AM
โSep-18-2017 06:12 AM
hvac wrote:
This is how ATC does it. 100 gallon tank.
โSep-17-2017 07:32 AM
โSep-16-2017 12:57 PM
โSep-16-2017 10:12 AM
โSep-15-2017 08:47 AM
โSep-15-2017 08:36 AM
lamopar wrote:
Here is a picture of the middle axle and the tank riding on it. You can see the strap and also see how much lower the tank is than the frame rails. I will have to make the cross bracing and vertical supports to hold the tank. Should be easy with some angle iron and all thread and some bracing. I will tack the nuts so they don't come loose.
โSep-15-2017 08:32 AM
big buford wrote:
I used .120 wall 1 x 3 rectangular steel. fix it once...
โSep-15-2017 08:02 AM
โSep-15-2017 07:44 AM
โSep-15-2017 07:38 AM
ScottG wrote:
Here's the Northwood method; Steel channel spanning frame.
โSep-15-2017 07:33 AM
lamopar wrote:
Here is a picture of the middle axle and the tank riding on it. You can see the strap and also see how much lower the tank is than the frame rails. I will have to make the cross bracing and vertical supports to hold the tank. Should be easy with some angle iron and all thread and some bracing. I will tack the nuts so they don't come loose.
โSep-15-2017 06:49 AM