Good Sam Club Open Roads Forum: Tech Issues: Slide-outs Manual Op plan needed...
Open Roads Forum Already a member? Login here.   If not, Register Today!  |  Help

Newest  |  Active  |  Popular  |  RVing FAQ Forum Rules  |  Forum Posting Help and Support  |  Contact  

Search:   Advanced Search

Search only in Tech Issues

Open Roads Forum  >  Tech Issues

 > Slide-outs Manual Op plan needed...

Reply to Topic  |  Subscribe  |  Print Topic  |  Post New Topic  | 
standup

Olympia, Washington

New Member

Joined: 10/09/2002

View Profile


Offline
Posted: 01/10/18 12:16pm Link  |  Quote  |  Print  |  Notify Moderator

I need to have a plan for when/if the slides fail. First, I'm trying to track down the make/model/serial# for my slides, and the Forest River people don't answer calls, so maybe someone can point out where to find this, and a resource for self-training this manual contingency plan. Original spec sheet shows Leppert/ALKO/Norco for the slide mechanism. Maybe that's all I can find out.
Just trying to nail it down a bit before I dig in. Thanks!


2014 Sunseeker 2500TS

DutchmenSport

Between Anderson, Pendleton, & Lapel, Indiana

Senior Member

Joined: 10/10/2006

View Profile



Good Sam RV Club Member

Offline
Posted: 01/10/18 01:38pm Link  |  Quote  |  Print  |  Notify Moderator

Maybe this will help. Click here.


DutchmenSport

2019 Montana High Country 375FL Fifth Wheel
2014 Chevy Silverado 3500 Duramax Dually

2 Dachshunds, 1 cat, 2 even older folks now, but still lots of love!

The new Montana is now officially, "The Love Shack 2"


valhalla360

No paticular place.

Senior Member

Joined: 08/19/2009

View Profile



Posted: 01/11/18 12:56am Link  |  Quote  |  Print  |  Notify Moderator

Mechanical or hydraulic?

Most mechanical systems can be operated with a hand crank.


Tammy & Mike
Ford F250 V10
2008 Copper Canyon 5er
Catalac Catamaran 34'
Full Time spliting time between boat and 5er


loggenrock

New Hampshire

Senior Member

Joined: 06/28/2007

View Profile





Offline
Posted: 01/11/18 08:11pm Link  |  Quote  |  Print  |  Notify Moderator

Check out the Lippert site:
https://www.lci1.com/slide-out-systems-and-components
I have found them very responsive when you call them. ST


Two and a hound in a 2015 Coachmen Prism "B+"...pushed by '09 Suby Forester
First 50 done, working on the second pass! Nunavut - we'll see...!
2005-2015 Roadtrek 190P
1993-2005 Northstar Soft-Side TC
1989-1993 Backpacks & Tents!
1967-1977 Family TT's



buzzard616

Medicine Hat, Ab, Canada

Senior Member

Joined: 04/11/2001

View Profile





Offline
Posted: 01/13/18 10:28pm Link  |  Quote  |  Print  |  Notify Moderator

Signature TT has a single superslide with 3' of extension. It is hydraulically operated with a single cylinder. both ends of the cylinder are threaded and stick through holes in the frame and slide. There are two nuts on either end, one on the 'push' side and one on the 'pull' side of the hole.

In the event of a hydraulic failure I carry two wrenches to remove the nuts at either end and dismount the cylinder. In its place I will install two large eyebolts with large washers. I carry a come along which I will attach to the eyebolts, suck the slide in, and go home.


Stu & Jackie Metcalfe
2000 Salem 27FKSS
2008 Sierra 2500 HD gasser


Reply to Topic  |  Subscribe  |  Print Topic  |  Post New Topic  | 

Open Roads Forum  >  Tech Issues

 > Slide-outs Manual Op plan needed...
Search:   Advanced Search

Search only in Tech Issues


New posts No new posts
Closed, new posts Closed, no new posts
Moved, new posts Moved, no new posts

Adjust text size:

© 2018 CWI, Inc. © 2018 Good Sam Enterprises, LLC. All Rights Reserved. | Terms of Use | PRIVACY POLICY | YOUR PRIVACY RIGHTS