pinesman wrote: For those who have used Heng's, or something similar, did you paint any of the metal trim also? I asked over on the tech section but gbopp was the only one who answered. Just looking for the best seal between the rubber and metal trim. I don't know whether to tape the trim or below the trim.
I think I'd put the coating up on the trim a bit, then Eternabond over the top of =that=. :B
Lyle
2022 GMC Sierra 3500 HD Denali Crew Cab 4x4 Duramax B&W OEM Companion & Gooseneck Kit 2017 KZ Durango 1500 D277RLT 1936 John Deere Model A International Flying Farmers 64 Year Member
For those who have used Heng's, or something similar, did you paint any of the metal trim also? I asked over on the tech section but gbopp was the only one who answered. Just looking for the best seal between the rubber and metal trim. I don't know whether to tape the trim or below the trim.
donewithtrucking wrote: Sorry i mispeled roof. Weak spots, meaning there is some rot on roof top along top by outer edge. Not going to invest money in removing roof, just trying to get another 5 years. Hung coating seems like the best deal.
That's a relief - because if you "foof" has weak spots, then your in big trouble...
Experience without good judgment is worthless; good judgment without experience is still good judgment!
2018 RAM 3500 Big Horn CTD 2018 Grand Design Reflection 303RLS
gbopp wrote: Heng's Rubber Roof Coating Works for me. Easy to apply, no primer needed. Clean your roof well before applying. I used 2 1/2 gallons to coat 30' of roof.
Have you had any long term results with this product to report . I am interested as to the longevity of this brand .
donewithtrucking wrote: Sorry i mispeled roof. Weak spots, meaning there is some rot on roof top along top by outer edge. Not going to invest money in removing roof, just trying to get another 5 years. Hung coating seems like the best deal.
Rot in the Rubber Roof??? Or supporting wood structure???
Sorry i mispeled roof. Weak spots, meaning there is some rot on roof top along top by outer edge. Not going to invest money in removing roof, just trying to get another 5 years. Hung coating seems like the best deal.
gbopp wrote: Heng's Rubber Roof Coating Works for me. Easy to apply, no primer needed. Clean your roof well before applying. I used 2 1/2 gallons to coat 30' of roof.
Ditto on the Hengs. Went on easy and left a thick white coat.
Arctic Fox 25Y Travel Trailer 2018 RAM 2500 6.7L 4WD shortbed Straightline dual cam hitch 400W Solar with Victron controller Superbumper
Heng's Rubber Roof Coating Works for me. Easy to apply, no primer needed. Clean your roof well before applying. I used 2 1/2 gallons to coat 30' of roof.
