cancel
Showing results forย 
Search instead forย 
Did you mean:ย 

Spartan service Az/Nv

Nutinelse2do
Explorer
Explorer
Need upper and lower ball joints replaced on our Spartan chassis.

Anyone have it done anywhere in Arizona or Nevada? If so, where, when, and how much?

Willing to go to Texas, New Mexico, or as a last resort Cali.

Thanks in advance
Living Our Dream
MTHRSHP - 2006 KSDP 3912
Cummins 350ISL...Spartan Chassis
ESC POD - 2019 Ford Ranger XLT FX4
Zippy Scoot- 2018 Honda PCX 150 on an Overbilt Lift
Shredder at the Rainbow Bridge - You Will Always Be With Us
4 REPLIES 4

Ken_C
Explorer
Explorer
Nutinelse2do wrote:
Thanks Bill. Actually called them early this morning before I posted.

Waiting for them to get back to us with a price.

Already know what parts we need, and how much they are directly from Spartan. Problem weโ€™re having is the shop we usually go to in the Phoenix area quoted us 10 hrs more labor than Spartan says ( 6 ) .

The man we talked to in Redlands nailed the labor hours off the bat, so thatโ€™s a good sign. Will post when he gets back to us.

Was hoping for a place in Arizona or Nevada. We try to stay away from Cali whenever possible

Thank you again


You might also want to check with Colton Truck in Colton Ca. They are also a Spartan repair facility. While likely not the cheapest around, their techs are very knowledgeable and we have had good service from them. Can't provide input regarding Redlands as have not used them
Ken
2018 Newmar Dutchstar
Spartan K2
2015 Jeep Cherokee Trailhawk

Nutinelse2do
Explorer
Explorer
Thanks Bill. Actually called them early this morning before I posted.

Waiting for them to get back to us with a price.

Already know what parts we need, and how much they are directly from Spartan. Problem weโ€™re having is the shop we usually go to in the Phoenix area quoted us 10 hrs more labor than Spartan says ( 6 ) .

The man we talked to in Redlands nailed the labor hours off the bat, so thatโ€™s a good sign. Will post when he gets back to us.

Was hoping for a place in Arizona or Nevada. We try to stay away from Cali whenever possible

Thank you again
Living Our Dream
MTHRSHP - 2006 KSDP 3912
Cummins 350ISL...Spartan Chassis
ESC POD - 2019 Ford Ranger XLT FX4
Zippy Scoot- 2018 Honda PCX 150 on an Overbilt Lift
Shredder at the Rainbow Bridge - You Will Always Be With Us

wallynm
Explorer
Explorer
RV Service Review

Check here
Have a Diesel Engine Diesel RV Club

Have a Freightliner FCOC Web Page

Living on the memories now
EX 02 DSDP 3567
EX 99 Coachmen
EX 86 Georgie Boy
EX 75 Winnie
EX 72 Sightseer
EX 68 Brave

THOSE THAT DO NOT KNOW HISTORY ARE DOOMED TO REPEAT IT

Trackrig
Explorer II
Explorer II
Assuming you're near a decent sized town, call a few of the local truck shops such as the service department at the Freightliner dealer. If they can't do it, they can probably recommend someone.

They may want the S/N and VIN of your MH to see what it takes.

I'm sure Redlands Truck and RV in Redlands, CA can do the work, but I find them a little bit on the expensive side for parts and they try to up sell you on things that don't really need to be done. The actual work and their mechanics knowledge was good. They also have their own RV park where you can spend the night for free coming and going.

Redlands Truck and RV web site

Bill
Nodwell RN110 out moose hunting. 4-53 Detroit, Clark 5 spd, 40" wide tracks, 10:00x20 tires, 16,000# capacity, 22,000# weight. You know the mud is getting deep when it's coming in the doors.