Need replacement 2 prong cord from Atwood Jack

[portscanner]

The cord going from my front left atwood jack to the plug in the camper has an intermittent connection. The problem is in the jack (male connector) - it appears the wire is broken loose from the copper pin that goes into the camper. As this is a molded one piece assembly, I could cut it apart and attempt to repair it, but I was hoping I could just buy a replacement off the shelf and be done with it. And that is where my problem starts.

I cannot find a replacement for just that cable by itself. Oh there are lots of kits with bunches of parts I dont need that have this part, but I was hoping just to purchase the cable.

Any suggestions as to where I can find a replacement for this simple black cable with a molded plug and two connectors?

[AnEv942]

Yes they are avalaible-2 pins off center or to one side. (same as 3 pin but 3rd not installed. marine/auto parts even wall mart use to carry.

[portscanner]

the above is what I need. The other end is bare wires.

[AnEv942]

Trolling motor plug may work, same style but splicing wire may be needed. amazon



On the 2 wire changing receptacle to SAE style plug like rieco-titan uses would give more options for motor plug.amazon

Mine uses 4 pin (manual switches) on drivers side

[Kayteg1]

Don't count on finding original part.
But that looks like common automotive connector, so taking the cable or its picture to automotive store might find you something.

[wnjj]

Do you have a picture?

Is it this? https://www.adventurerv.net/atwood-plug-wire-black-electric-jack-two-prong-p-4833.html

Or is that for a different style. You mention 2 connectors and a cable. Is this for one end? You may have to splice. Or is this the camper side and you need the part the plugs into this?

Would this work? https://www.wiringproducts.com/4-contact-male-square-molded-connector-8-wires.html