โJul-09-2020 10:33 AM
โJul-13-2020 09:35 AM
theoldwizard1 wrote:I'm not sure what your application is but in general most any resin that is fiber reinforced will be good enough for a side wall of a MH. Azdel is just a thermoplastic material(polypropylene) and most Azdel products are FRP . Epoxy reinforced with a woven fiberglass will be stronger. Woven FG will be better in shear and stronger in general(tension,compression,bending etc) than random fibers like Filon. Azdel, Lamilux, FRP epoxy or polyester will all work for sidewall. It will be next to impossible to get mechanical properties like shear strength from their web sites so you will have to call and talk to their technical dept if shear strength is important to your application..wanderingaimlessly wrote:
They have basically no structural strength, at least in the vervion I used, but there should be others which may work for you.
These are used for sheathing, so I need shear strength to prevent the walls from racking front to back.
โJul-09-2020 07:37 PM
theoldwizard1 wrote:Terryallan wrote:
This could give you a starting place on buying Azdel. Also google, ...
I have googled Azdel every which way I can think of. Most place just praise the product. Some are wholesale distributor (not looking for a semi load).
This one is selling left over/over stock panels, but at an excellent price !
Azdel Composite Panels 4x8 - $13 (GLASSBORO)
โJul-09-2020 06:57 PM
wanderingaimlessly wrote:
They have basically no structural strength, at least in the vervion I used, but there should be others which may work for you.
โJul-09-2020 06:52 PM
Terryallan wrote:
This could give you a starting place on buying Azdel. Also google, ...
โJul-09-2020 12:12 PM
โJul-09-2020 11:27 AM