BurbMan

Islip, Long Island

Senior Member

Joined: 09/20/2001

View Profile


Good Sam RV Club Member
|
Our 2002 Lance 811 has the Atwood electric jacks with wireless remote control. The guy that I got the camper from said the jacks stopped working and he couldn't figure out why. I was able to find out that the Atwood controller modules were very well made and were prone to unrepairable failure.
As you know, Atwood was bought by Rieco-Titan, who was bought by Lippert, and they stopped making the Atwood jacks. Rieco-Titan makes a compatible controller, but it's very $$$.
So I stumbled across this on Amazon made by Gama Electronics. Note the updated design with each jack circuit protected by a 30a fuse. Also totally sealed and 100% waterproof, which is a good thing since it mounts under the sink LOL.
(click on pics for Amazon links)
![[image]](https://images-na.ssl-images-amazon.com/images/I/81GcVzGHZRL._AC_SL1500_.jpg)
Gama also makes this remote control:
![[image]](https://images-na.ssl-images-amazon.com/images/I/81GDUi0So-L._AC_SL1500_.jpg)
and this activation switch:
![[image]](https://images-na.ssl-images-amazon.com/images/I/71p5pSRUTTL._AC_SL1500_.jpg)
I bought all 3 and installed them last weekend. Now every jack works as it should, independently and as a set. I know there are a zillion campers with these jacks installed, so if anybody is looking for reasonably priced electronics, these are worth the $$.
2015 Ram 3500 SRW 4x4 Laramie Crew Cab Long Box, Cummins diesel
2002 Lance 811 Slide-In Camper
SOLD: 2008 Terry 34' TT
SOLD: 2001 K2500LT 8.1L Suburban
Lance 811 Renovation Story!
Project Complete!
Maiden Voyage!
|
Buzzcut1

Norcal

Senior Member

Joined: 10/04/2010

View Profile

Offline
|
X2 on Gamma. I bought my replacement Remote from them a few years back. My jacks have worked flawlessly since then.
2011 F350 6.7L Diesel 4x4 CrewCab longbed Dually, 08 Lance 1055, Torqlift Talons, Fast Guns, upper and lower Stable Loads, Super Hitch, 48" Super Truss, Airlift loadlifter 5000 extreme airbags
|
NRALIFR

Truck Camping Out West

Senior Member

Joined: 11/27/2005

View Profile

|
I’m glad to hear a good review of Gama from someone who’s bought their product. I’ve had a bookmark to their site for several years now, just in case I need them.
I *think* Gama was who manufactured the electronic parts for Atwood all along.
Thanks for posting your experience with them.
![smile [emoticon]](https://forums.goodsamclub.com/sharedcontent/cfb/images/smile.gif)
2001 Lance 1121 on a 2016 F450
|
K Mac

Lower Hudson Valley N.Y.

Senior Member

Joined: 06/09/2011

View Profile

Offline
|
I like the "Made in the U S A " aspect. After just having a minor glitch with my jacks, I also will be keeping this info also, thanks.
|
BurbMan

Islip, Long Island

Senior Member

Joined: 09/20/2001

View Profile


Good Sam RV Club Member
|
Googling around looking for info I was reading a lot of "SOL" posts on Atwood jacks, so I figured not many folks knew about these Gama guys, so thought I would share.
|
|
Kayteg1

California > Nevada

Senior Member

Joined: 06/18/2015

View Profile

Offline
|
NRALIFR wrote: I’m glad to hear a good review of Gama from someone who’s bought their product. I’ve had a bookmark to their site for several years now, just in case I need them.
I *think* Gama was who manufactured the electronic parts for Atwood all along.
Thanks for posting your experience with them.
![smile [emoticon]](https://forums.goodsamclub.com/sharedcontent/cfb/images/smile.gif) ![smile [emoticon]](https://forums.goodsamclub.com/sharedcontent/cfb/images/smile.gif)
Looks like they use the same molds for sure. Here is set I removed from 2002 camper.
I see "Song Chuan" brand on the relay. Doesn't sound American.
![[image]](https://i.imgur.com/ugXaF7Rl.jpg )
Click For Full-Size Image.
|
Mote

Hoosier State

Senior Member

Joined: 05/25/2005

View Profile

Offline
|
Thanks for the information. I may just go ahead and order a replacement remote as the bottoms on ours are getting some age on them.
Does the remote have to be programmed or does it just work once the batteries are installed ?
2005 Dodge 3500
2001 Lance 1030
2006 Cougar 29RL
|
Buzzcut1

Norcal

Senior Member

Joined: 10/04/2010

View Profile

Offline
|
Mote wrote: Thanks for the information. I may just go ahead and order a replacement remote as the bottoms on ours are getting some age on them.
Does the remote have to be programmed or does it just work once the batteries are installed ?
The remote works right out of the box. no programming needed
|