cancel
Showing results for 
Search instead for 
Did you mean: 

Back cushion support in the forward dining area,mods

dwpnomad
Explorer
Explorer
Howdy Everyone,
I have a '05 Trail lite 19' Bantam Flier,Rocky Mountain edition and love it..
I bought it used so don't know how they supported the front back cushion in the dining area? Does anyone know how this is done? Thanks in advance!!
As far as mods ,I moved the elec plug to the side instead of in the front as well as the heating duct. I used the rectangular snorkel dryer
ducting which made it far more compact and durable as well. It worked out quite well and made much more room in the front storage area as well.Did the same under the sink area.
1 REPLY 1

Beverley_Ken
Explorer
Explorer
I would help if you could post a picture of the area your dealing with. On our old hybrid one end of the dinette was the end wall of the trailer and the other was part of the dinette box.
In our current c-class, the dinette the area is a box with supporting end walls from the floor up. Actually the front, (behind the passenger seat) has a hinged cutout so that the passenger seat can recline.

Ken
2006 Winnebago Outlook 29B E-450.
2012 Honda CR-V AWD
Blue Ox Aventa LX tow bar and Brake Buddy Vantage.