Good Sam Club Open Roads Forum: Tech Issues: weber bbq q 100
Open Roads Forum Already a member? Login here.   If not, Register Today!  |  Help

Newest  |  Active  |  Popular  |  RVing FAQ Forum Rules  |  Forum Posting Help and Support  |  Contact  

Search:   Advanced Search

Search only in Tech Issues

Open Roads Forum  >  Tech Issues

 > weber bbq q 100

Reply to Topic  |  Subscribe  |  Print Topic  |  Post New Topic  | 
instalation

Vancouver island

New Member

Joined: 04/24/2014

View Profile


Offline
Posted: 08/08/20 06:54pm Link  |  Quote  |  Print  |  Notify Moderator

I have hooked up my Weber BBQ Q100 to my stock trailer hook up connection ,,it works but flame is really weak low flame only low heat even at full blast,, has anybody else had this problem , I assume gas pressure is 11 inches mercury pressure, any suggestions thanks Denis

bob213

Fresno, CA

Senior Member

Joined: 12/09/2007

View Profile



Good Sam RV Club Member

Offline
Posted: 08/08/20 07:14pm Link  |  Quote  |  Print  |  Notify Moderator

The Torjik version is not available but you need something like this. You can not have two regulators and get required gas flow. Trailer already is regulated so you must remove BBQ regulator.
Weber Quick connect


You can avoid reality, but you cannot avoid the consequences of avoiding reality – Ayn Rand


instalation

Vancouver island

New Member

Joined: 04/24/2014

View Profile


Offline
Posted: 08/08/20 07:59pm Link  |  Quote  |  Print  |  Notify Moderator

Already removed existing reg still have weak flame ,wondering if larger jet is an option

Taxman2436

Holden, MA

Full Member

Joined: 04/29/2020

View Profile


Offline
Posted: 08/08/20 08:10pm Link  |  Quote  |  Print  |  Notify Moderator

instalation wrote:

Already removed existing reg still have weak flame ,wondering if larger jet is an option


Try turning off the gas to the grille and the propane tank(s). Wait 5 mins then turn on the propane tank(s) then turn on the grille.


Taxman2436
Holden,MA
2019 Ford F-250 6.7 L Diesel
2021 Salem Hemisphere


jjrbus

FT Myers FL

Senior Member

Joined: 07/19/2008

View Profile


Offline
Posted: 08/09/20 05:26am Link  |  Quote  |  Print  |  Notify Moderator

I have the small Weber baby Q. The flame does not get blast furnace high, it is possible you are expecting too much?? Will it get up to temperature?

Disassemble as much as you can and look for dirt, bugs. Soak the orifice in alcohol and blow it out. Might convert it back to small bottle use and see if that works??


I have had it 20 years, gets used 2 to 3 times a week and have never had an issue or replaced a part. Best grill ever made.

jesseannie

Roseburg, OR

Senior Member

Joined: 03/29/2014

View Profile


Offline
Posted: 08/09/20 07:53am Link  |  Quote  |  Print  |  Notify Moderator

I have heard? That turning on the gas quickly keys a limiter and the flame is lower. That seemed to happen with my Q.
I now turn on and increase the propane very slowly.
Seems to work?

Jesseannie

instalation

Vancouver island

New Member

Joined: 04/24/2014

View Profile


Offline
Posted: 08/09/20 01:44pm Link  |  Quote  |  Print  |  Notify Moderator

Think I'm expecting too much ,converted back to original reg,flame was a little better but not blast hot,it will eventually get up to temp just takes a little longer, thanks for the help folks stay safe

Reply to Topic  |  Subscribe  |  Print Topic  |  Post New Topic  | 

Open Roads Forum  >  Tech Issues

 > weber bbq q 100
Search:   Advanced Search

Search only in Tech Issues


New posts No new posts
Closed, new posts Closed, no new posts
Moved, new posts Moved, no new posts

Adjust text size:




© 2021 CWI, Inc. © 2021 Good Sam Enterprises, LLC. All Rights Reserved.