bedpan

Canada

Full Member

Joined: 03/20/2015

View Profile


Good Sam RV Club Member
Offline
|
Thanks Doug,
I will see what my discussions tomorrow bring. Your suggestions are likely my backup if they do not come to task.
dougrainer wrote: LCI DOES NOT build any RV's. They just supply a LOT of the components that are used in the build. LCI will stand by the Frame. It is just getting LCI and Heartland to get together and get it done for you. I will tell you, to get the best result, you HAVE to do this
1. Type up a letter with your PIC of the VIN sticker included and all pics of your problem. Your letter states what is wrong and you cannot get any help from Heartland or LCI
2. DO NOT GET NASTY (at this point)
3. Try to include all pertinent info in your letter. Include copies of your Sales agreement.
4. Send the same letter and pic copies to the President of Heartland and the President of LCI.
5. Send the same to Heartland Customer service referencing your copies to the Presidents.
6. Send them Certified----This IS important. You will have a record of them getting the letters
7. Just ask that they take care of your problem without you having to jump thru all sorts of hoops.
8. TRUST ME. This will get a response. Doug
|
joebedford

Sheltering at home

Senior Member

Joined: 09/03/2003

View Profile

|
There IS a procedure for repairing frames at the spring hanger. Ask how I know.
Everybody's different but if it were me, I'd take the procedure to my local welding shop and get them to do it. Won't be more than a few hundred dollars. Yes, I know it's under warranty, but sometimes...
Lippert Frame repair procedure
|
bedpan

Canada

Full Member

Joined: 03/20/2015

View Profile


Good Sam RV Club Member
Offline
|
Thanks Joe,
I posted a link to the same document a few pages back..
How was your cracks compared to mine? How are things holding up? You happy with it over all?
joebedford wrote: There IS a procedure for repairing frames at the spring hanger. Ask how I know.
Everybody's different but if it were me, I'd take the procedure to my local welding shop and get them to do it. Won't be more than a few hundred dollars. Yes, I know it's under warranty, but sometimes...
Lippert Frame repair procedure
|
dedmiston

The West

Moderator

Joined: 01/26/2004

View Profile


Good Sam RV Club Member
|
Hey everyone. This is an interesting discussion and I appreciate how constructive the feedback has been so far.
Unfortunately there's one taboo angle to this topic and it's non-negotiable: Legal
Please refrain from any discussion of lawyers, lawsuits, or consumer agencies. Any further Legal discussion will result in the thread being deleted for good and without further warnings.
Forum Rules wrote: Posts are not allowed in which a local, state, or federal consumer action board and/or legal counsel is/have been involved. This includes posts related to future, ongoing or past lawsuits.
|
bedpan

Canada

Full Member

Joined: 03/20/2015

View Profile


Good Sam RV Club Member
Offline
|
Thanks there Dedmiston. Legal advise was certainly not why I started the thread. It has been suggested but I have been pretty clear it was not my goal. I do appreciate everyone's advise though.
dedmiston wrote: Hey everyone. This is an interesting discussion and I appreciate how constructive the feedback has been so far.
Unfortunately there's one taboo angle to this topic and it's non-negotiable: Legal
Please refrain from any discussion of lawyers, lawsuits, or consumer agencies. Any further Legal discussion will result in the thread being deleted for good and without further warnings.
Forum Rules wrote: Posts are not allowed in which a local, state, or federal consumer action board and/or legal counsel is/have been involved. This includes posts related to future, ongoing or past lawsuits.
|
|
bedpan

Canada

Full Member

Joined: 03/20/2015

View Profile


Good Sam RV Club Member
Offline
|
Further update for those interested..
I spoke with the dealer today. They seem to acknowledge that this is taking to long and that Heartland is not providing any help. They are scheduling a Welder they use to come have a look and provide some insight. They are planning on contacting Lippert once they have some direction from the welder.
I contact Lippert anyways.. Just the front line support. Turns out Heartland had not created a ticket with Lippert as I was told. Oh well. I provided all the details they needed and photos. The dealer needs to forward on a few more photos as they want photos of the VIN and photos of the 4 sides of the trailer. I am told 24 hours and they should be back to me...
Time will tell!
Cheers,
Mike
|
dedmiston

The West

Moderator

Joined: 01/26/2004

View Profile


Good Sam RV Club Member
|
That sounds like good progress. Well done.
2014 RAM 3500 Diesel 4x4 Dually long bed. AISIN trans & 4.10 rear. B&W RVK3600 hitch • 2015 Crossroads Elevation Homestead Toy Hauler ("The Taj Mahauler") • Hooligan #3
Toys:
- 18 Can Am Maverick x3
- 05 Yamaha WR450
- 07 Honda CRF250X
- 05 Honda CRF230
- 06 Honda CRF230
|
MEXICOWANDERER

las peñas, michoacan, mexico

Senior Member

Joined: 06/01/2007

View Profile

Offline
|
Please show images of the fix
|
JaxDad

Greater Toronto Area

Senior Member

Joined: 08/02/2011

View Profile


Good Sam RV Club Member
Offline
|
bedpan wrote: Further update for those interested..
I am told 24 hours and they should be back to me...
Time will tell!
Cheers,
Mike
I’m likely only an hour or so west of you (near Lake Simcoe) feel free to reach out if you need a second opinion..
|
bedpan

Canada

Full Member

Joined: 03/20/2015

View Profile


Good Sam RV Club Member
Offline
|
For sure.. I see a fair number of people looking for help on similiar issues. I will do my best to share the whole story including the repair.
MEXICOWANDERER wrote: Please show images of the fix ![smile [emoticon]](https://forums.goodsamclub.com/sharedcontent/cfb/images/smile.gif)
|
|