Good Sam Club Open Roads Forum: 2018 Winnie Drop Slide out not working
Open Roads Forum Already a member? Login here.   If not, Register Today!  |  Help

Newest  |  Active  |  Popular  |  RVing FAQ Forum Rules  |  Forum Posting Help and Support  |  Contact  

Search:   Advanced Search

Search only in Travel Trailers

Open Roads Forum  >  Travel Trailers  >  General Q&A

 > 2018 Winnie Drop Slide out not working

Reply to Topic  |  Subscribe  |  Print Topic  |  Post New Topic  | 
Sabre3

Halfway to where you want to be

New Member

Joined: 09/03/2020

View Profile


Offline
Posted: 09/03/20 08:10pm Link  |  Quote  |  Print  |  Notify Moderator

Hello,
This is my first post and I come looking for some help.
I have a 2018 Winnebago Winnie drop. The slide out quit working and I can't seem to figure it out.
I discovered a chaffed wire where the wiring bundle goes through the floor, I replaced that wire from the control box to the auto-resetting fuse.
I replaced the auto resetting fuse on the inside of the left front frame rail.
There were no lights at all on the control box (Lippert #13398-DO)
So I bought a new control box and still no worky

Looking for some ideas?
The slide out makes no noise at all. No effort to operate

* This post was edited 09/03/20 09:14pm by Sabre3 *

afidel

Cleveland

Senior Member

Joined: 12/23/2016

View Profile


Offline
Posted: 09/03/20 11:37pm Link  |  Quote  |  Print  |  Notify Moderator

Did you check for 12V input coming into the control box before replacing it?


2017 KZ Sportsmen Classic 181BH
2015 GMC 1500 Sierra 4x4 5.3 3.42 long bed
E2 WDH


Sabre3

Halfway to where you want to be

New Member

Joined: 09/03/2020

View Profile


Offline
Posted: 09/06/20 02:29pm Link  |  Quote  |  Print  |  Notify Moderator

Yes, there is power coming into the control box. How would I check to see if power is coming out of the box?

afidel

Cleveland

Senior Member

Joined: 12/23/2016

View Profile


Offline
Posted: 09/06/20 03:57pm Link  |  Quote  |  Print  |  Notify Moderator

I would backprobe the harness connector at J2 and J3 on the black and red pins using my multimeter, if your probes are too big for that then use a pin to packprobe and hook your leads to the pins.

Reply to Topic  |  Subscribe  |  Print Topic  |  Post New Topic  | 

Open Roads Forum  >  Travel Trailers  >  General Q&A

 > 2018 Winnie Drop Slide out not working
Search:   Advanced Search

Search only in Travel Trailers


New posts No new posts
Closed, new posts Closed, no new posts
Moved, new posts Moved, no new posts

Adjust text size:




© 2020 CWI, Inc. © 2020 Good Sam Enterprises, LLC. All Rights Reserved.