โSep-13-2020 05:52 PM
the 3000i will perform an automatic equalization at the factory default settings of 15.2V for 2 hours every 30 days which is typically suitable for most flooded lead-acid batteries
The maximum setpoint voltage limit places a maximum limit or ceiling on the charge voltage setpoint used by the 3000i in all charge modes to prevent inverters or other equipment from shutting down due to excess voltage. Regardless of initial setpoints, charge mode or temperature compensation the 3000i will not use a charge voltage setpoint greater than the maximum setpoint voltage limit (uPr) factory set to 15.5V.
โSep-14-2020 09:41 AM
โSep-14-2020 06:45 AM
jkwilson wrote:StirCrazy wrote:
if you have a deicent fuse set up it will be filtered dc current so you realy dont need to worry about it.
Steve
A fuse performs no filtering. Itโs just a wire, and even if it did that would have no effect on the voltage.
โSep-13-2020 09:16 PM
StirCrazy wrote:
if you have a deicent fuse set up it will be filtered dc current so you realy dont need to worry about it.
Steve
โSep-13-2020 09:00 PM
โSep-13-2020 07:57 PM
โSep-13-2020 07:12 PM
โSep-13-2020 06:47 PM
โSep-13-2020 06:39 PM
โSep-13-2020 06:35 PM