cancel
Showing results forย 
Search instead forย 
Did you mean:ย 

3M stripes on camper doors.

rvyoungjp
Explorer
Explorer
I'm trying to redo the stripes on my 2007 Springdale. When it comes to the rough surface of the doors (which I think are a foam core setup), I can't get the 3M vinyl striping to stick.

They've been cleaned to within an inch of their lives.

Any suggestions?
4 REPLIES 4

Rvpapa
Explorer
Explorer
That is the proper way BUT I have found that a wipe down with paint thinner (not Lacquer thinner) then a wash with Dawn, finally a mix of 98% ALCOHOL AND WATER. One part alcohol to 9 parts water and use only clean paper towels. A cloth never seems to be perfectly clean. Good luck
Art

rvyoungjp
Explorer
Explorer
Rvpapa wrote:
Cleaned with what?
Art


isopropyl alcohol

wa8yxm
Explorer III
Explorer III
I suggest this with great caution (Test in an inconspicuous area first type caution like bleach on fabric)

GOOP. it's a mild adhesives and sealant. Some formulas are very UV resistant. Sticks to dang near everything... But some things better than others.
Home was where I park it. but alas the.
2005 Damon Intruder 377 Alas declared a total loss
after a semi "nicked" it. Still have the radios
Kenwood TS-2000, ICOM ID-5100, ID-51A+2, ID-880 REF030C most times

Rvpapa
Explorer
Explorer
Cleaned with what?
Art