Good Sam Club Open Roads Forum: Tech Issues: slide out
Open Roads Forum Already a member? Login here.   If not, Register Today!  |  Help

Newest  |  Active  |  Popular  |  RVing FAQ Forum Rules  |  Forum Posting Help and Support  |  Contact  

Search:   Advanced Search

Search only in Tech Issues

Open Roads Forum  >  Tech Issues

 > slide out

Reply to Topic  |  Subscribe  |  Print Topic  |  Post New Topic  | 
hogbob

S.F CA.

Senior Member

Joined: 12/23/2003

View Profile





Offline
Posted: 09/09/21 10:37pm Link  |  Quote  |  Print  |  Notify Moderator

Hello
I have a 2004 newmar and the rear slide comes in but stops about five inches from being flush . Thank you for any help. Kenny

wa8yxm

Davison Michigan (East of Flint)

Senior Member

Joined: 07/04/2006

View Profile


Offline
Posted: 09/10/21 04:52am Link  |  Quote  |  Print  |  Notify Moderator

Best guess is somethign is blocking it... Inspect every place one part moves over another especially in the basement if it's a power gear

if it's an Accuslide the problem is harder to deal with

And the 3rd company I do not know anything about (Swientech)
HWH hydraulic should not have that problem


Home was where I park it. but alas the.
2005 Damon Intruder 377 Alas declared a total loss
after a semi "nicked" it. Still have the radios
Kenwood TS-2000, ICOM ID-5100, ID-51A+2, ID-880 REF030C most times


dougrainer

Carrolton, Texas

Senior Member

Joined: 06/11/2007

View Profile


Offline
Posted: 09/10/21 09:10am Link  |  Quote  |  Print  |  Notify Moderator

2004 Newmar will be Newmar designed Slide motor and mechanism. There are a few things that will cause your problem. The Lock arms are bent and jamming the slide from fully closing. The Motor Intellitec controller is either defective or needs its amp draw pot adjusted. The motor itself may be defective and is drawing too many amps and causing the Intellitec motor controller to amp out and stop operation. If you have a slide cover, have you checked to make sure the slide cover is not rolling correctly and jamming the last 5 inches? Usually the Motor Intellitec controller for the rear slide on Newmars is located in the Mid bath area cabinets. ALL parts are Newmar supplied except you can get the controller from other RV suppliers. This link shows what the controller looks like. Doug

https://www.camperid.com/intellitec/cont........MHR0t7-ppQ-XvTHrBfVwfyAg9pBoCh1EQAvD_BwE

dougrainer

Carrolton, Texas

Senior Member

Joined: 06/11/2007

View Profile


Offline
Posted: 09/10/21 09:13am Link  |  Quote  |  Print  |  Notify Moderator

This is a troubleshooting guide. Doug


https://newpar.newmarcorp.com/instance1E........99NEWMAR/html/images/SS2011SlideOuts.pdf

Reply to Topic  |  Subscribe  |  Print Topic  |  Post New Topic  | 

Open Roads Forum  >  Tech Issues

 > slide out
Search:   Advanced Search

Search only in Tech Issues


New posts No new posts
Closed, new posts Closed, no new posts
Moved, new posts Moved, no new posts

Adjust text size:




© 2021 CWI, Inc. © 2021 Good Sam Enterprises, LLC. All Rights Reserved.