specta

utah

Senior Member

Joined: 06/18/2001

View Profile

|
![[image]](https://i.postimg.cc/xT3C0tWH/IMG-7551.jpg)
It ended up being a beautiful drive to work this morning.
Its supposed to get down to 15° tonight, no biggie.
I will leave the water heater on and leave the space heater on too.
I head out at about 2:30 PM and get back at 5:00 AM the next morning so I'm not here when its really cold.
Clear blue skies and 43° right now.
Kenny
2011 Chevy 2500 HD 6.0L 4wd
1976 Ford F-250 6.4L 4wd
1995 Lance 945 Onan QG 2500 LP
Regular cab. The best looking trucks.
|
BigSwick

FL

New Member

Joined: 08/19/2021

View Profile

|
I am new to truck campers, so there is a lot I don't know. But curious about the tiedowns. Looks like a big camper to be just attached just to the bed and not the frame. I know with my Cirrus 820 and an aluminum body truck I wouldn't want to do it.
|
MORSNOW

Mountain Home, ID

Senior Member

Joined: 10/29/2013

View Profile

Offline
|
BigSwick wrote: I am new to truck campers, so there is a lot I don't know. But curious about the tiedowns. Looks like a big camper to be just attached just to the bed and not the frame. I know with my Cirrus 820 and an aluminum body truck I wouldn't want to do it.
Those are HappiJac tie downs and they do go to the frame. The front has brackets that bolt down thru the box into the frame and are secured to the front of the box with more bolts and a load spreading bar. The rear tabs are bolted thru the bumper where an additional bracket goes from the bumper up to the trucks frame. I have been using this same set up for 9 years and driven off road all over Alaska and now the western US. It holds the camper in place much better due to the angles of the tie downs. https://happijac.com/tie-downs.html
2014 Wolf Creek 850SB
2012 GMC Sierra SLT 2500HD
7,220# Truck/10,400# Camper Fully Loaded
|
specta

utah

Senior Member

Joined: 06/18/2001

View Profile

|
BigSwick wrote: I wouldn't want to do it.
Neither would I.
|
jimh406

Western MT

Senior Member

Joined: 06/11/2006

View Profile


Offline
|
BigSwick wrote: I am new to truck campers, so there is a lot I don't know. But curious about the tiedowns. Looks like a big camper to be just attached just to the bed and not the frame. I know with my Cirrus 820 and an aluminum body truck I wouldn't want to do it.
Believe it or not. Happy Jack was the recommended brand for Lance at least years ago. I don't know if they still are or not. Lance has done a few things differently including their front struts.
'10 Ford F-450, 6.4, 4.30, 4x4, 14,500 GVWR, '06 Host Rainer 950 Dbl Slide, Torklift Talon tiedowns, Glow Steps, and Fastguns. Bilstein 4600s, Firestone Air Bags, Toyo M655 225/19.5 Gs, Curt front hitch, Energy Suspension bump stops.
|
|
specta

utah

Senior Member

Joined: 06/18/2001

View Profile

|
Happijac was recommend by Lance for YEARS!!! Almost forever.
|
BigSwick

FL

New Member

Joined: 08/19/2021

View Profile

|
Thanks to all for the information. It appears they don't make tie downs for Ford, GM, or Ram newer than 2017.
|