BurbMan

Indianapolis, IN

Senior Member

Joined: 09/20/2001

View Profile


Good Sam RV Club Member
|
I ordered the Curt Extension to add a 7-pin plug into the bed of the truck. It's a no-cut no-splice setup that plugs into the factory harness at the bumper plug.
My question is: Where do I put the plug in the bed? Does it matter if on the left or right side? Anybody know where the factory would have put the plug on a 2015 Ram if it came with the 5th wheel prep?
|
schlep1967

Harrisburg, PA

Senior Member

Joined: 12/08/2005

View Profile


Good Sam RV Club Member
|
To most it makes more sense to put it on the drivers side. After you back under the trailer and hook up you get out of the truck and walk back to hook up the trailer plug and the breakaway cable. You are already on that side of the truck. Why walk around the truck to hook it up?
2021 Chevy Silverado LTZ 3500 Diesel
2009 Open Range 385RLS
Pull-Rite Super Glide 4500
|
Cummins12V98

on the road

Senior Member

Joined: 06/03/2012

View Profile

Offline
|
Drivers side near tailgate mid height on the side of the bed.
Here you can't go wrong as this is mine in my 2015 RAM same as yours. Nice indented area.
Pics not loading right now I will post later.
* This post was
edited 02/10/22 09:21am by Cummins12V98 *
2015 RAM LongHorn 3500 Dually CrewCab 4X4 CUMMINS/AISIN RearAir 385HP/865TQ 4:10's
37,800# GCVWR "Towing Beast"
"HeavyWeight" B&W RVK3600
2016 MobileSuites 39TKSB3 highly "Elited" In the stable
2007.5 Mobile Suites 36 SB3 29,000# Combined SOLD
|
BarryG20

Castle Rock, Colorado

Senior Member

Joined: 07/14/2015

View Profile


Good Sam RV Club Member
Offline
|
On my 2017 and now 2022 ram I have it on the driver side about a foot to 18 inches or so in from the tailgate. On the 17 it was just above the centerline in height. On my 22 there is a 120 volt plug in the bed in that area so I just put it next to it. It does sit a bit higher than the 17 but I just put it right inline with that plug and to the rear of it.
2016 Jayco 28.5 RLTS
|
Njmurvin

Simi Valley

Senior Member

Joined: 09/06/2003

View Profile

Offline
|
Cummins12V98 wrote: Drivers side near tailgate mid height on the side of the bed.
^^^^
This
I've had it on the driver's side just behind the cab and now driver's side just inside the tailgate. I like this location so much better.
2020 Chevy Silverado 3500HD Duramax 4x4 Crew Cab Standard box
2011 Arctic Fox 27.5L
|
|
BurbMan

Indianapolis, IN

Senior Member

Joined: 09/20/2001

View Profile


Good Sam RV Club Member
|
This is very helpful, thanks guys!
|
LadyRVer

Florida

Senior Member

Joined: 09/04/2007

View Profile


Offline
|
My first fifth-wheel, the dealer installed the 7-pin plug on the driver's side, on the fender well. It worked great for me.
|
Cummins12V98

on the road

Senior Member

Joined: 06/03/2012

View Profile

Offline
|
OK here ya go!!! Factory location.
|
BurbMan

Indianapolis, IN

Senior Member

Joined: 09/20/2001

View Profile


Good Sam RV Club Member
|
Nice! Thanks for that!
|
1320Fastback

Vista, Ca

Senior Member

Joined: 12/04/2016

View Profile

Offline
|
Mines home made and my truck is old but I chose driver's side and just infront of the fender well about half way up.
1992 D250 Cummins 5psd
2005 Forest River T26 Toy Hauler
|
|