Tom_Anderson
NorCal
Senior Member
Joined: 04/23/2006
View Profile
Good Sam RV Club Member
 Offline
|
My F-250 has a pressure switch on the master cylinder that went bad and kept the cruise control from working. It was like a 5 minute job to replace it.
|
bobndot
USA
Senior Member
Joined: 08/21/2007
View Profile
Offline
|
Tom_Anderson wrote:My F-250 has a pressure switch on the master cylinder that went bad and kept the cruise control from working. It was like a 5 minute job to replace it.
The video i posted might be that.
|
Tom_Anderson
NorCal
Senior Member
Joined: 04/23/2006
View Profile
Good Sam RV Club Member
Offline
|
bobndot wrote:Tom_Anderson wrote:My F-250 has a pressure switch on the master cylinder that went bad and kept the cruise control from working. It was like a 5 minute job to replace it.
The video i posted might be that.
Yup, you're right. Sorry, I didn't watch the video before posting my reply.
|
Kober
Arizona
Senior Member
Joined: 02/01/2003
View Profile
|
I could not find any blown fuses. Watched some youtube videos and one guy mentioned that LED lights might cause the computer to stop letting the cruise control do its thing. Also watched the video about the sensor on the bottom of the master brake cylinder. The sensor in under the master cylinder and no way to get to it without dismantling the water reservoir at a minimum. Autozone can't find the part. Ford dealer says they cant work on RVs. Gonna try a couple of private mechanics in town.
2014 Coachmen Freelander 29qb, towing a trailer with my toys:
2020 Honda Talon SXS, or
2006 Royal Star Tour Deluxe
2008 Road Star 1100
PATRIOT GUARD RIDER, AMERICAN LEGION RIDER
Retired 25 years US ARMY, retired 24 years business owner
|
30sweeds
Iowa
Full Member
Joined: 03/24/2018
View Profile
Offline
|
https://www.amazon.com/Motorcraft-SW6349-Cruise-Control-Cutout/dp/B000IYIUD2
Not really that hard.Use a 7/8 box wrench.
|
|
|
MDKMDK
Free(er), for now, until the next "variant"
Senior Member
Joined: 10/15/2008
View Profile
|
30sweeds wrote:https://www.amazon.com/Motorcraft-SW6349-Cruise-Control-Cutout/dp/B000IYIUD2
Not really that hard.Use a 7/8 box wrench.
"Currently unavailable.
We don't know when or if this item will be back in stock."
Mike. Comments are anecdotal or personal opinions, and worth what you paid for them.
2018 (2017 Sprinter Cab Chassis) Navion24V + 2016 Wrangler JKU (sold @ ????)
2016 Sunstar 26HE, V10, 3V, 6 Speed (sold @ 4600 miles)
2002 Roadtrek C190P (sold @ 315,000kms)
|
Kober
Arizona
Senior Member
Joined: 02/01/2003
View Profile
|
30sweeds wrote:https://www.amazon.com/Motorcraft-SW6349-Cruise-Control-Cutout/dp/B000IYIUD2
Not really that hard.Use a 7/8 box wrench.
Thanks for the link. I'm going to try adding the ballast to the LED lights and if that doesn't work I'll order that cutout.
|
