KenS999
West Dundee, IL
Full Member
Joined: 03/08/2008
View Profile
 Offline
|
Hello I have a norcold refrigerator #N306RM8. What is the purpose and function of the flame meter on the refrigerator face? I noticed that the flame meter needle has moved out of the green zone where it used to stay when the refrigerator burner is running on lp. It also appears that the burner intensity dial if set below medium will cause the burner flame to drop out and I get the audible gas solenoid click. Has anyone experienced these issues and how to correct them?
Thanks,
Ken
|
mfinnerty
Wentzville, Mo.
Senior Member
Joined: 05/02/2007
View Profile
Good Sam RV Club Member
Offline
|
Not familiar with your model but in my experience when the flame has trouble lighting or staying lit it's usually an issue with the flame orifice tube. It could have debris that can be blown off or the tube can be corroded and needs replacing.
Mike & Linda Finnerty with Finn & Rosco (Golden mix brothers)
|
enblethen
Moses Lake, WA
Senior Member
Joined: 01/05/2005
View Profile
Offline
|
Maybe the Manual will help! See page 5.
Seems like the flame sensor needs to be adjusted slightly!
Bud
USAF Retired
Pace Arrow
2003 Chev Ice Road Tracker
|
KenS999
West Dundee, IL
Full Member
Joined: 03/08/2008
View Profile
Offline
|
Thank you for the advice and info. Ken
|
|
|
