Feb-28-2017 05:26 AM
Mar-24-2017 10:59 AM
Mar-24-2017 09:05 AM
Mr.Mark wrote:
Glad that you found it Effy and it was simple but time consuming.
Safe travels,
MM.
Mar-24-2017 08:08 AM
Mar-24-2017 06:59 AM
Mar-20-2017 09:06 AM
Mar-20-2017 07:56 AM
Mar-19-2017 02:25 PM
Don's Lock wrote:
Run a separate 12v line a touch each terminal on the motor.
Don
Mar-19-2017 02:03 PM
Mar-19-2017 01:53 PM
Mar-01-2017 04:43 AM
Mar-01-2017 04:14 AM
Feb-28-2017 06:32 PM
Feb-28-2017 05:44 PM
hottubkid wrote:For that I'd probably go to self fusing tape. Least all the pieces will be there.. 🙂SCVJeff wrote:
Buy a tube of dialectric grease and use it on any connectors that get wet. That's what it's for.. you will find it from the factory on countless electrical and RF connectors. It's the foggy clear stuff with the viscosity of Vasolene
Normaly I would agree but my coach is a 2004 and the outside of the connector broke and fell off. So I sealed it. In this case the rtv can be pulled off
Feb-28-2017 01:03 PM