Hey folks. TLDR: Getting an E7 error code on our tankless water heater, except sometimes it's an E1 code and sometimes it's an E2 code. What's the problem and how do we fix it?We've been using our water heater with no problem as full-timers for almos...
Hello, all you helpful people out there.My furnace is once again having another issue. We've been living full-time in our trailer for almost 4 years and we had 3 good years with the furnace working flawlessly. Last spring we started having trouble wi...
So my current couch is original to the trailer... meaning it's almost 30 years old. My couch cover hides the insane 90s pattern, but even adding cushioning underneath hasn't been able to make it comfortable.I've been dying to replace it for the last ...
Hey folks! Long time reader, first post!So we've lived full-time in our 1997 Fleetwood Mallard 30ft for almost 4 years. Until recently we were plugged in at a full-time RV park and had no electrical issues.We recently moved to a new location (MIL's h...
Update on my repair attempts.According to the Service Manual, the E7 code indicates a problem with the gas valve.I purchased a new gas valve for $110 and used the service manual to replace the part. It wasn't complicated, but some rusted screws made ...
Hey folks, final update. I ordered a new igniter, new solenoids for the gas valve, and a new control board (dinosaur brand). I decided to just replace all 3 parts rather than keep putting it together and taking it apart again 3 times.Unfortunately, I...
S Davis wrote:Have the electrical connections been checked/cleaned, a grounding issue could cause those symptoms. Also when you replaced the burner did you make sure the igniter gap was set correctly? If too far you can get intermittent or no spark ...
I'm going to go ahead and replace the igniter, since it's only a $30 part and fairly easy to get to.I will hold off on replacing the control board for now, but it's going to be my next step. We just replaced our old converter and the new one is just ...
Update! I ordered and installed a new converter and it seems to have completely solved our problem. Also, it's much quieter and doesn't run nearly as hot, with much less fan noise. Overall, the installation was simple, with most of the difficulty com...
